The longer the battery is used, the smaller the capacity of the battery and longer the charging cycle and charging time.
Efficient battery management with capability of constant current or constant current-constant voltage charging in high battery voltage ranges. Contains the charging system with transformer that can ensure high charging efficiency and reliability. The longer the battery is used, the smaller the capacity of the battery and longer the
charging cycle and charging time.
The longer the battery is used, the smaller the capacity of the battery and longer the charging cycle and charging time. Battery capacity is reduced with repeated charge and discharge cycles. This is due to the formation of crystallized sulfite and deactivation during the discharge cycle. This causes an increase in internal resistance and a decrease in the specific gravity of sulfuric acid, resulting in deterioration of battery life. These batteries cannot use regular battery chargers.
MPC – 1007K
Is capable of constant current or constant current constant voltage charging in high battery voltage ranges. The system controls voltage and current precisely through CPU control, checks battery temperature during charging through a temperature sensor, and controls the current automatically to protect the battery.
MPC – 2,000K
Large capacity charger is constant voltage constant current charger capable of charging max. 15 A within the range of 400V ~ 2,000V charge voltage. MPC 2000K can be used in high battery charging voltage range of 2,000V. It uses circuits and components that require high reliability and high quality appropriate for high pressure.
MPC – 101K
Is battery charger for generator starting, which is designed specifically for starter batteries. General chargers cause many defects due to over current when the engine starts. In addition, constant voltage and constant current charging cannot be performed, significantly deteriorating battery life due to overcharging and insufficient charging.
Discharge testing is the only way to verify battery capacity. including battery capacity, battery maintenance, engineering, and DC power with load. During a discharge test, constant current automatic discharge can be performed constantly, regardless of the voltage range with accurate sensing of current through digital control without the need of manual current adjustment.
MPD – 1007K
Can be used with the MCS Restoration System. It can check the performance of the battery accurately by linking with equipment control and BMS (Battery Monitoring system) through wireless communication.
MPD – 2,000K
The discharge test is the only way to verify the capacity of the battery. The MPD – 2,000K can perform all battery performance tests, including battery capacity, battery maintenance, engineering, and DC power with load.